How to Flush Your Water Heater for Better Water Quality?

Do you flush the water heater regularly? The reason we are asking this question is very simple. Like any other plumbing appliance, it also needs regular cleaning and flushing to work smoothly and perform its job well. Unfortunately, most individuals use water heaters almost every day but ignore their maintenance requirements.

With regular use, dregs and other mineral pollutants start to gather in water heaters. As a result, water quality is affected, and the performance of the appliance declines significantly. If you ignore this issue for a considerable time, the water heater might develop complications or shut down completely one day. This leads to expensive plumbing repairs. So how to flush a water heater perfectly? Should you take a professional’s help? Let’s find out.

How To Know My Water Heater Needs To Be Flushed?

First, you will find that the water in your faucet is hot enough. Secondly, brown or sludge-like dirt starts to appear in the water heater. Whenever you see these developments, be ready for a water heater flush. Ideally, you must perform this job at least 2 times (or more, depending on the intensity of the appliance use) a year. For tankless water heater flushes, consider contacting us at Parzival Plumbing. We offer our services in Costa Mesa and the surrounding areas and flush water heaters perfectly.

How To Flush A Water Heater? Why Can Our Help Make A Difference? 

Always keep in mind that flushing a water heater means dealing with hot water, drain pipes, electricity, and gas. You need to have the proper knowledge of the appliance and its working mechanism, check for leaks, and gather the necessary tools. Ordinary individuals often fail to take care of all these. Unprofessional handling of the water heater can result in unpleasant consequences. So, it is always beneficial to contact our professional plumbers to perform the task. They offer water heater flush service in Huntington Beach and other surrounding areas.

Flushing Water Heater: How Do Our Seasoned Plumbers Perform The Task?

Turning off The Water Heater

At first, our local plumbers in Newport will turn off the water heater’s thermostat, gas, and water supply. It is an essential safety step that prevents injuries or accidents when they work on the appliance and flush it. 

Collecting Necessary Tools & Materials 
To flush the water heater, our plumbing contractors may use these tools and materials- 

Screwdriver	Depending on the water heater installed in your house, we may use a screwdriver to open the drain valve.
Towels or Rags	We use them to clean drips and spills.
Bucket or Floor Drain	It helps to collect water that flushes out of the heater during cleaning and maintenance work.
Garden Hose	We use it to drain water from the heater.

While booking your appointment for our water heater flush service, please provide us with detailed information about the appliance and the issues you are facing. The correct narration of the problem enables our plumbers to visit your premises with the necessary tools and perform the job instantly.

Connecting The Garden Hose To Water Heater
We attach the garden hose to the drain valve at the bottom of the water heater to stop leaks. The other side of the hose is directed to the floor drain or a bucket. It collects the drain water. If the drain valve is far off, we might use a wrench or pliers to facilitate the connection.

Opening The Drain Valve & Flushing
Once the hose is connected securely, we open the drive valve. The water starts flowing out. We let it flow until waste materials deposited at the bottom of the water heater are completely flushed out. If it has not been flushed for many years, a huge quantity of waste materials may come out when we perform the job.

Closing The Drin Valve and Disconnecting The Hose
When the water runs clear, we close the drain valve tightly. After this, the garden hose is disconnected from the valve. We make sure that there are no leaks at all. 

Refilling & Restarting The Water Heater
After closing the drain valve and disconnecting the hose, we refill the water heater by turning on the water supply and letting the tank fill up. After this, the power and gas supply are also turned on. Always keep in mind that water heaters may take time to heat water. You should wait for hot water. Ensure that the tank is filled with water and the temperature remains at an optimal level. This will ensure the water heater is working properly after the cleaning and maintenance drive.

Conclusion
Flushing the hot water heater is essential if you use it regularly. It will ensure its optimal performance, and everyone in the home has easy access to hot water for multiple purposes. If you don’t know how to flush a water heater safely, contact Parzival Plumbing. Our local plumbers in Newport Coast will help you with top-notch water heater flush service and eliminate all issues with the water heater. Easy availability of convenient appointments, strict compliance with safety protocols, attention to even the smallest details, and high-quality work are our specialties.